pixma e510

pixma e510 2019-05-29T10:20:43+00:00

Canon PIXMA E510 Setup Support

Canon Pixma E510 Setup Steps

  • Unpack the shipment box containing the Canon printer.
  • Take the Canon machine out of the box and place it on a flat-leveled surface.
  • Remove the plastic cover covered over the printer for the Canon Pixma E510 setup process.
  • Take all the printer accessories from the printer box and keep them on a separate place.
  • Detach all the orange plastic tapes attached to the printer door.
  • Raise the top lid over the scanner platen until it stops.
  • Check and remove any protective material inside the cartridge access area.
  • If any unnecessary materials are found, remove them from the printer.
  • Take the power cord, unwrap it, and connect it to the power outlet and appropriate printer port at the rear side of the machine.
  • Switch on the power source to supply power to the printer. Once the printer turns on, give it some time to complete its initialization process.
  • Set your printing preferences on the control panel.
Canon Pixma E510 setup

How To Load Paper On Canon Pixma E510 Printer?

Canon Pixma E510 Printer Paper
  • Arrange the edges of a stack of paper on a leveled flat surface before loading it into the input tray.
  • Make sure the printer is powered on & the Canon Pixma E510 setup is done.
  • Unlock the front door of the printer.
  • Slide out the paper extender if needed.
  • Adjust the sliding paper guides and set them in their farthest positions.
  • Place the arranged paper stack into the center of the input tray and between the paper guides.
  • Set the paper guides on the edges of the paper stack.
  • Open the output tray then extend the paper holder if needed.

How to Install Ink Cartridge in Canon Pixma E510?

  • Unpack the new FINE cartridge from the polythene bag.
  • Be cautious while handling the cartridges. Touch only the black plastic sides of the cartridge.
  • Detach the orange tape from the FINE Canon Pixma E510 ink cartridge.
  • Do not touch the copper-coated electrical contacts on the cartridge.
  • Turn on the Canon printer after connecting it to a stable power unit.
  • Lower the front cover of the printer.
  • Wait while the printhead holder moves across the width spindle. Reach our experts to get instant Canon Pixma E510 setup related support.
  • Let the printhead holder halt to the replacement position.
  • When the printhead holder moves to the replacement position, the small door opens up suddenly.
  • Lower the cartridge holder.
  • With the copper contacts facing the printer, insert the FINE cartridge into the printhead.
  • Place the cartridges into the respective slots.
  • Raise the replacement position door until it locks into a place.
  • After installing the cartridges, do not forget to close all the doors which are all opened to begin the Canon Pixma E510 setup & installation process.

Canon Pixma E510 Manual Download

Browse for the manufacturer’s site on your computer. Click the search field and enter the Pixma E510 printer. Once you find the Canon E510 printer page, click the Ctrl + F keys on your keyboard and type Manual. When you locate the Manual Download header, read the instructions and click the Download link below the description. Now the manual file starts downloading to your computer’s Downloads folder. Once the manual file is downloaded, double-click to open and make use of it.

To download the manual file from the manufacturer site, navigate to Canon site on a new tab. Enter Canon E510 printer in the search area and start searching. Click the Manuals tab to view the list of manual files. Choose the driver file that you need to download on your computer. Click the Download option. Now the PDF file opens online on a new tab. Click the Download icon to start downloading the file to your computer. After downloading the file, you can use it offline for the Canon Pixma E510 setup process.

Canon Pixma E510 Manual Download

Canon Pixma E510 Driver Download

Make sure your computer is connected to a high-speed, active internet. Open a web browser and browse for the manufacturer site on a new tab. Enter your printer model name in the search box and click the Search icon. When the drivers list is shown, click Download option to start downloading the file to your computer. The Canon Pixma E51 driver downloaded file will remain in the Downloads folder on your computer.

Canon Pixma E510 Driver Download

Canon Pixma E510 Driver Installation

  • Make sure the computer is powered on and the Canon Pixma E510 setup is done.
  • Log into your computer with the administrator credentials.
  • Set up a router network. Ensure that it is ready to connect to your devices.
  • Connect your computer to the router through a wired Ethernet connection or wireless setup.
  • Take the CD-ROM supplied along with your printer from the package.
  • Place the CD ROM into the disc player on your computer.
  • Open the My Computer folder on your Windows computer.
  • Open the CD drive folder and unzip the file if it is compressed.
  • In case the CD-ROM is not available, go to the manufacturer’s site to search and download the driver that supports your printer model.
  • Double-click the Canon Pixma E510 Setup.exe file and select Run as Administrator option.
  • Go with the installation messages shown on the screen.
  • When the Canon Installer prompts you to select a Connection type, select the USB connection on the screen.
  • Check if the USB cable is connected properly between the printer and computer.
  • Add the Canon E510 printer to the computer and make it as the default printer.
  • Complete the printer driver installation. When it prompts to restart the computer, close all the active programs and restart the computer to apply the changes that you have made.

How to Print on Canon Pixma E510 printer?

  • Ensure that your printer is plugged into an electrical socket and is turned on for the Canon Pixma E510 setup process.
  • Lower the front lid of the Pixma printer.
  • Extend the input tray from the printer.
  • Move the white colored paper guides to their farthest position.
  • Place sufficient A4 paper or photo paper in the center of the input paper tray.
  • Slide the white colored paper guides to rest on the edges of the paper.
  • Move the input bin into the printer until it fixes to a place.
  • Slide out the output tray and extend the paper support in order to carry the printed output.
  • Ensure your printer is linked to the computer through a USB cable.
  • Using a document viewer application, open the document that you need to print on your computer.
  • Press the Ctrl and P buttons at the same time to open the Printer Properties or Printing Preferences window.
  • Choose the Canon Pixma E510 printer using which you need to print.
  • You can also modify print settings like number of copies, black and white settings, paper type as per your requirement on the control panel.
  • Save all your settings on the Printer Properties window and click Print.
  • The printer starts printing the assigned print job.

How to Scan on Canon Pixma E510 printer?

  • Confirm that your computer is in the active state.
  • Connect the computer to a network that has good internet speed.
  • Download the full feature driver file on your computer.
  • Start the installation process and install all the driver software that you have downloaded.
  • The Canon IJ Scan Utility software downloads along with the full feature driver.
  • Mount the item that you need to scan on the platen with respect to the engraved guides.
  • The Canon Pixma E510 printer is designed in such a way that even large scan items like booklet can be placed on the scanner platen with the top printer cover closed.
  • Start the IJ Scan Utility tool.
  • Click Settings to change various settings like paper size, type, resolution, etc. as per your preferences.
  • Once you have changed all the settings, click OK to save the changes.
  • Click Document to start the scanning process.
  • Wait until the Canon machine finishes scanning.
  • The scanned images are saved in the folder specified in the settings.

How to Copy on Canon Pixma E510 printer?

  • Make sure the printer is turned on for the Canon Pixma E510 setup process.
  • Open the top lid of the scanner unit.
  • Situate the original files to be scanned on the scanner platen.
  • Lower the top lid of the printer until it rests on the top of the scanner platen.
  • Load some white, A4-sized paper into the input tray.
  • Press the Start Black or Start Color button on the printer control panel.
  • The Canon machine starts the copying process.
  • Take the original documents from the scanner platen after the printer completes the scanning process.
  • To make multiple copies, press the Color or the Black button multiple times depending on the number of copies you want.
  • Once the copy process ends, select the number of copies and paper type, and then print the copied document.

Canon Pixma E510 Reset

  • Press the ON button on the panel turn off the Canon E510 printer.
  • You can see the LED light near the A4 Plain Paper continuously blinking on the operation panel.
  • Place at least two sheets of white paper into the input tray.
  • Make sure the FINE cartridges are correctly installed.
  • Press the Stop/Release button and ON button at the same time.
  • Release the Stop/Release button while holding the ON button.
  • Without releasing the ON button, repeatedly press the Stop/Release button for about five times.
  • You can now release the ON button.
  • Wait until the LED light near the A4 Plain Paper on the printer panel stops blinking and remains lit.
  • When the green LED light glows steadily, it indicates that the printer is in the Service mode. Launch the Service Tool application for the Canon Pixma E510 printer.
  • The Service tool window opens on your computer screen.
  • Click the EPROM tab and select a paper source.
  • Choose the paper source from the rear tray and check if the printer prints out a paper.
  • Choose your specific region where you are using the printer in the Set Destination menu. Click the Set tab.
  • Now the Tool displays a message as A function was finished. Click OK.
  • Select the Main option from the ink absorber drop-down list and click Set.
  • When it shows a message, click OK.
  • Choose the Main option under Clear Ink counter and click Set again. Click OK when the message appears.
  • The printer prints another sheet of paper. Stop the Service and turn the printer Off. When the printer restarts successfully, all the settings will be restored to factory defaults.
Canon Pixma E510 Reset

Canon Pixma E510 Troubleshooting

How to resolve the printing issues on Canon Pixma E510?

  • Ensure that you have selected appropriate page size, media type, and other settings that match with the paper sheets you have loaded in the input tray.
  • If the printing settings are inappropriate, you cannot obtain a proper print output. so make sure that the Canon Pixma E510 setup process is done properly.
  • Ensure you have selected the correct print quality settings in accordance with the photo or paper that you have loaded.
  • Change the print quality settings and then correct the image data properly.
  • Install the updated version of the MP drivers and printer firmware.
  • Check for any other error messages on the printer. Reach our experts to get easy Canon Pixma E510 troubleshooting tips.
  • If the print job is extremely large to be printed, enable Prevention of Print Data Loss option. This may reduce the quality of the print.
  • Check if your network-connected computer has enough storage space.
  • Sometimes insufficient hard disk space might also be the reason for the print issues.
  • Do not allow the print driver to compress the print data which may reduce the quality of the print drastically.
  • In case the issue persists, reset the printer settings to factory defaults and then try setting up the print settings from the beginning.
  • If the persists even after resetting the printer, check with an authorized service provider to resolve the issue.

How to resolve poor print quality on Canon Pixma E510?

  • Check and confirm the preferred print settings in the print driver Canon Pixma E510 setup window.
  • Make sure the ink levels in the FINE cartridges installed on your printer is not very low or empty.
  • Print the Nozzle Check Pattern report. If the quality of the pattern is poor, perform printhead cleaning.
  • If the printhead cleaning process does not resolve the issue, try performing Print Head Deep Cleaning.
  • In case the ink in the FINE cartridge runs out, replace the empty cartridge with a new one.
  • Confirm that you have placed the paper with the side to be printed facing down.
  • Make sure the FINE cartridge is installed properly.
  • If the input tray is dusty, clean it before placing the paper into it.

How To Resolve Paper Smudges Issue On Canon Pixma E510 Printer?

  • Confirm you have changed the print settings properly for the Canon Pixma E510 setup process.
  • Load only the paper of the same type into the input tray at a time.
  • Do not load any curled or folded sheets into the input tray.
  • Arrange the paper edges before placing it in the input tray.
  • Change the print settings according to the loaded print media to avoid paper abrasion.
  • In case the intensity is high, set the intensity value low and then perform printing again.
  • To change the intensity, navigate to the print driver setup window on your computer.
  • Click the Manual under Color/Intensity. Click Set. For easy Canon Pixma E510 troubleshooting tips just reach our experts.
  • On the Color Adjustment sheet, adjust the color intensity using the slide bar.
  • Check and confirm that the printer prints the input data beyond the printing area. Change the page size in the print driver setup window.
  • Before copying your original, clean the scanner glass bed and paper feed roller manually. Also, clean the inside of the machine.
  • Increase the ink drying time. Open up the print driver setup window and click the Maintenance tab and then click Custom Settings.
  • Set the Ink Drying Wait Time high on the slide bar and then click OK.
  • If the issue is not resolved, perform cleaning the bottom plate and inside of the machine.
  • In case any vertical lines are printed on sides of the printout, check whether the paper is loaded properly. For further Canon Pixma E510 setup related support just reach us.

What to do when the Scanner does not work on Canon Pixma E510 Printer?

  • Confirm that your Canon E510 scanner is powered up.
  • Plug in the USB cable at the appropriate port on your computer.
  • Make sure the USB wire is less than 3 meter (9 ft 10 in) in length.
  • In case you have connected the USB cable to a hub or hocking device, it may not receive enough power to operate.
  • Remove the USB cable from the hub and connect it to the appropriate USB port on your computer.
  • Restart the network connected computer and check if the issue is resolved.

How To Resolve The Canon Pixma E510 Scanner Driver Issue?

  • Confirm that the MP driver is properly installed on the computer to which the printer is connected.
  • Add your printer or scanner to the computer on the applications menu.
  • In case your printer name displays multiple times, select any one name that does not include WIA driver.
  • Check to assure that the ScanGear supports TWAIN.
  • After completing the scanning process, save the images with IJ Scan Utility and then open the files in the ScanGear application.
  • If the problem persists, exit the ScanGear and make sure it is not operating on any other application. For instant Canon Pixma E510 setup related support just reach our experts.

Canon Pixma E510 Scanning Speed Issue?

  • Change the image resolution on the IJ Scan Utility tool.
  • If you need to view the image on the screen, set the output resolution as 150 dpi.
  • If you are printing a document, set the dpi around 300.
  • Change some of the image settings like Fading Correction and Grain Correction to none, it may increase the scan time.
  • Open the IJ Scan Utility app, deselect the checkbox next to the Correct Slanted text document/ Detect the Orientation of Text Document.
  • After changing all these settings, click Scan.
  • Exit from other applications presently active on your computer.
  • Check the Storage space on your computer and then start Scan again.

How to Resolve Poor Scan Quality Issue?

  • In case the scanned image is not clear, increase the resolution of the scan in the IJ Scan Utility tool.
  • Change the current display size and set it to 100% for the Canon Pixma E510 setup process.
  • If any stripe appears on the scanned image, proceed with the following steps to resolve the issue.
  • Click the Settings tab on the IJ Scan Utility tool.
  • Select the Magazine option under Select Source and change the Color Mode to Color.
  • Select the Reduce More option that can be found under the Image Processing Settings menu.
  • Click on the Basic Mode tab in ScanGear settings. Under the Select Source option choose Magazine (Color).
  • Locate and click the Advanced Mode option. Find the Descreen option under Image Settings and set it ON.
  • Inspect the color depth of the monitor.
  • Clean the dirty glass scanner platen and document cover.
  • Make sure the document is not of poor quality or in a dirty condition.
Quick Printer Support